Palmitoyl Pentapeptide-4 98% Powder is a concentrated signal peptide for serums, eye products and emulsions focused on fine-line, firmness and texture care. Unlike a diluted premix, it gives direct control of active loading. Choose a paid evaluation pack, then request commercial quantities.
- 98% powder for controlled R&D and custom active loading.
- For fine-line, firmness and skin-texture concepts.
- Suitable for serums, eye products and emulsions.
Product Specifications
|
Property |
Product Information |
|
Product Name |
Palmitoyl Pentapeptide-4 |
|
INCI Name |
Palmitoyl Pentapeptide-4 |
|
Ingredient Type |
Palmitoylated signal peptide / skin-conditioning active |
|
Commercial Form |
Powder |
|
Assay |
98% |
|
Typical Product Formats |
Leave-on serums, eye-care products, creams, lotions and gel creams |
|
Use Category |
Cosmetic formulation raw material for external-use finished products |
Key Benefits
- Visible fine-line care. Studied finished formulas support photoaged-skin and crow’s-feet appearance claims. [R3,R5]
- Firmer, smoother-looking skin concepts. Fits briefs focused on firmness, elasticity and texture.
- Precise low-level dosing. Gives formulators control of peptide loading without a fixed premix carrier.
Typical Applications
- Precision peptide serums for visible fine-line and texture care
- Eye creams and eye serums for crow’s-feet appearance
- Firming moisturizers, gel creams and lightweight facial emulsions
- Neck and décolletage age-support products
Quick Formulation Guide
|
Parameter |
Practical Development Guidance |
|
Typical active level |
Evaluate approximately 3–50 ppm active (0.0003%–0.005%) in the finished formula for comparable Pal-KTTKS systems. [R2–R5] |
|
Recommended starting point |
Start around 5 ppm active (0.0005%) for a first leave-on prototype. [R3,R5] |
|
Weighing strategy |
Do not weigh sub-milligram amounts on a standard balance. Use a validated stock and calculate from its confirmed peptide content. |
|
Phase and addition |
Add the validated stock or uniform dispersion to the aqueous system during cool-down. Pure palmitoylated powder can be difficult to dissolve directly in water. [R6] |
|
Temperature strategy |
Minimize unnecessary heat exposure and add after the main heat cycle once the batch is cool enough for the validated peptide stock. |
|
pH strategy |
Begin in a mildly acidic to near-neutral system, around pH 5.5–6.0, then verify appearance, assay retention and preservative performance in the complete formula. |
|
Compatibility checks |
Screen strong acids or bases, redox actives, high electrolyte loads, surfactants and chelating systems. |
|
Packaging and stability |
Use suitable protective packaging. Run accelerated and real-time stability, freeze–thaw and packaging-compatibility checks. |
First Prototype Example
A 100 g batch at 5 ppm requires 0.5 mg active peptide, which is usually impractical to weigh directly. If a validated 0.05% stock contains 0.5 mg per gram, add 1.00 g stock and reduce the matching formula carrier by 1.00 g. Add during cool-down, begin near pH 5.5–6.0, mix until uniform and record pH, appearance and viscosity. Confirm stock-carrier and preservative compatibility before scaling.
Recommended Ingredient Pairings
|
Recommended Ingredient |
Why It Pairs Well |
Product Concept |
|
Adds humectant hydration and serum slip. |
Hydrating peptide serum |
|
|
Adds tone, texture and barrier-support value. |
Daily multi-active serum |
|
|
Adds barrier-lipid support to an age-support cream. |
Peptide barrier cream |
|
|
Adds conditioning and comfort-focused support. |
Soothing firming lotion |
|
|
Creates a distinct multi-peptide expression-line concept. |
Advanced peptide eye serum |
Scientific Evidence Snapshot
A 12-week double-blind split-face study in 93 women evaluated a moisturizer containing pal-KTTKS and reported improvements in photoaged facial-skin endpoints. [R3] A later randomized study evaluated a 0.005% cream for crow’s-feet appearance. [R5] Laboratory work also found greater stability and skin distribution for palmitoyl-KTTKS than unmodified KTTKS in the tested model. [R4]
Research and References
You may also like
-
DDBD Diacetate 99 Percent Powder
Regular price From $39.90 USDRegular price$0.00 USDSale price From $39.90 USD -
Acetyl Octapeptide-3 (SNAP-8) Cosmetic Grade Peptide
Regular price From $39.90 USDRegular price$0.00 USDSale price From $39.90 USD -
GHK-Cu Blue Powder 99% | Copper Tripeptide-1
Regular price From $14.90 USDRegular price$0.00 USDSale price From $14.90 USD -
PDRN / Sodium DNA Powder 99% (Polydeoxyribonucleotide)
Regular price From $14.90 USDRegular price$0.00 USDSale price From $14.90 USD -
Matrixyl 3000 Palmitoyl Tripeptide-1 + Palmitoyl Tetrapeptide-7 Peptide Blend — 200 ppm Premix Liquid
Regular price From $19.90 USDRegular price$0.00 USDSale price From $19.90 USD -
Synthetic Melittin Powder 98%|Cosmetic Grade Synthetic Bee Venom Peptide
Regular price From $49.00 USDRegular price$0.00 USDSale price From $49.00 USD -
Diglucosyl Gallic Acid 98% Powder
Regular price From $29.90 USDRegular price$0.00 USDSale price From $29.90 USD -
Tetrahydrocurcumin 98% Powder
Regular price From $16.90 USDRegular price$0.00 USDSale price From $16.90 USD
Request a Quote
Tell us your required quantity, destination country, and any documentation needs. We usually reply within 1 business day.
